RadioShack NCredible2 Mode D'emploi page 2

GETTING THE RIGHT FIT
You can adjust the NCredible2 Headphones by
pulling up or down on the headband until you
find a comfortable fit on your ears.
CONNECTING/BLUETOOTH PAIRING
1. Make sure Bluetooth is turned ON on
your device.
2. Press and hold POWER button for 6 seconds
to enter pairing mode. The LED light will
rapidly flash blue and red when pairing.
3. Select "NCredible2" from the list of found
devices.
4. When paired, the LED slowly flashes blue.
Adjustable
2
PAIRING TROUBLESHOOTING
1. When performing the pairing on a Bluetooth device to detect
the headphones, enter 0000 if your device prompts you for a
password during the pairing process.
2. If the pairing is not successful, turn off the headphones and
perform the pairing connection according to the Bluetooth
Pairing steps on the previous page.
NOTE: To clear/stop the pairing, hold the volume up/down button
for 6 seconds and try again.
3