JB Systems MR-S06 Mode D'emploi page 8

MICROPHONE
FEATURES
1. High sensitivity cardioids capsule for your professional use.
2. Special noise absorption parts inside the barrels,
which eliminate switch shock noise and handling noise.
3. Frequency with quartz locked control.
4. Easy-opening battery compartment for battery replacement.
5. Low battery LED inidicator.
OPERATION
1. Open the battery cover and insert battery into the battery
house according (+) and (-) indications marked on the battery
house.
2. Push the power switch ON, the LED indicator will flash to
indicate that the carrier frequency is sending out.
The microphone is ready for use.
3. Switch the power ON, the LED indicator flashing means that
power supply is normal. If the LED indicator lights up it means
that the battery needs to be replaced. If there's no flashing,
then there's no battery inserted or it isn't properly inserted.
4. Push the power button OFF when the microphone isn't used
and remove the battery in the microphone if not used for a
long time. This will prevent any damage that a defective
'leaking' battery may cause.
MR-S06 + MX-V30
8