Hama 00176566 Mode D'emploi page 3

4. Technical data
Power supply
Frequency band
Maximum radio-
frequency power
transmitted
Speci cations according to
Regulation (EU) 2019/1782
Brand name, commercial
register number, address
Model identi er
Input voltage
Input AC
frequency
Output voltage / output
current / output power
Average e ciency during
operation
E ciency at low load
(10%)
Power consumption at
zero load
5. Start-up and operation
Warning
• Only operate the product from an approved
socket that is connected to the public power
supply. The socket must be installed close to the
product and must be easily accessible.
• Disconnect the product from the power supply
using the On/Off switch – if this is not available,
unplug the power cord from the socket.
• If using a multi-socket power strip, make
sure that the total power consumption of all
connected devices does not exceed the power
strip's maximum throughput rating.
• If you will not be using the product for a
prolonged period, disconnect it from mains
power.
• The camera can only be supplied with power
via USB.
5 V 1 A
2.4 GHz
< 100 mW
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim,
Germany
GTA92-05100EU
100-240 V
50/60 Hz
5.0 V DC / 1.0 A /
5.0 W
71.7 %
65 %
0.10 W
• For USB operation, connect a micro-USB cable
(included in the scope of delivery) with the micro-
USB socket and a suitable USB power supply unit
(included in the scope of delivery). Connect the
power supply unit to a socket. Only operate the
product from a socket that has been approved
for the device. The socket must be installed close
to the product and must be easily accessible.
Be aware that, if using a USB power supply, no
batteries must be inserted.
Here's how easy it is:
Download the app
• Download the Hama Smart Home (Solution)
APP from the Apple App Store or Google Play
Store.
• Open the Hama Smart Home (Solution) APP.
• The rst time you use the app, you need to
register and create a new account. If you already
have an account, log in with your access details.
• Follow the instructions in the app.
Note
A detailed description of the
Hama Smart Home (Solution) App
and its full scope of functions can be found in our
App Guide at:
www.hama.com ð Article Number ð Downloads
ð App Operating Instructions
Note: Pairing restart
Press the Reset button on the back for
approx. 5 seconds until a signal sound is heard.
As soon as the LED starts to ash red, you can
start a further pairing attempt.
6. Care and maintenance
Note
Disconnect the product from the mains before
cleaning and during prolonged periods of
non-use.
• Only clean this product using a lint-free, slightly
damp cloth and do not use any harsh cleaners.
• Ensure that no water is able to enter the product.
5