Assembling And Disassembling - FACAL Castiglia Mode D'emploi Et Entretien

ASSEMBLING AND DISASSEMBLING

INTRODUCTION: The assembling and disassembling
need at least two people.
SEQUENCE OF OPERATIONS FOR THE ASSEMBLING:
A) Starting from the "closed" position (picture 1), open the platform
putting the work top in a horizontal position (picture 2)
SCREW FOR THE
DIAGONALS' FIXING
A
C) Thanks to the hand-wheel, block the work top
(detail B). Continue the assembling plugging the
object holder plane and fixing it with the hand-
wheels (detail A)
D
A
E) When you climb and get down off it's necessary
to watch the platform.
Never turn back on it.
DIAGONAL
DET AIL
(when diagonals
are double)
A
DIAGONAL
DET AIL
D)
STABILIZER
B
A
STABILIZER
B
B) Secure the side diagonals with the
screws placed on the standards.
Before using the platform block the brake of the
front wheels (detail A). Assemble the stabilizers
where they are required by the norm (detai B) and
block it firmly through the hand-wheels.
7
A
Fig. 1
C
E
Fig. 2
A
A
B
B