Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
If your Stand Mixer should malfunction or fail to operate, please check the following :
• Is the Stand Mixer plugged in?
• Is the fuse in the circuit to the Stand Mixer in working order ? If you have a circuit breaker box, be sure
the circuit is closed.
• Turn the Stand Mixer off for 10-15 secons, then turn it back on. If the mixer still does not star, allow it
to cool for 30 minutes before turning it back on.
Error:
E1
Loose connect
for the jug
Problem:
and Base ,
or Resistor
problem.
Fit well the jug
Solution:
and base.
E2
E3
The water or
Lid is open or
liquid is lower
Not well fit.
than the anti-
dry sensor.
Add more
Close the lid or
water or lid
fit well the lid.
until over the
sensor.
E4
E5
Cooking too
long time,
The water
the motor
or liquid is
or Heating
more than
element is
the Maximum,
under HIGH
the over-flow
temperature
sensor works.
environment.
Just to cool
Pour out
down the
some water or
machine.
liquids.
Publicité
Table des Matières
