Krups FBC2 Serie Mode D'emploi page 5

English
• Empty the crumb tray regularly. Do not cover the crumb tray with aluminum foil, as this will cause
the appliance to overheat.
• This appliance is designed solely for household use; any professional or inappropriate use or use
not in accordance with these instructions renders the warranty null and void.
• Use extreme caution when removing tray or disposing of hot grease.
• Any work other than cleaning and care must be entrusted to the nearest KRUPS authorized
service center.
There are no user repairable parts. In order to avoid any risk fire or electrocution, repairs may only
be carried out by the qualified personnel of a KRUPS approved service center.
SAVE THESE INSTRUCTIONS
CAUTION
• Check that the supply voltage matches that indicated on the appliance.
• Given the diversity of applicable standards, if this appliance is to be used in a country other than
that in which it was purchased, you should have it checked by an approved service center.
• Use a solid work surface away from any water splashes.
• Do not carry or move the appliance during use.
• Do not pull on the supply cord to unplug the appliance.
SPECIAL CORD INSTRUCTIONS
A. A short power-supply cord is provided to reduce the risk of becoming entangled in or tripping
over a longer cord. Extension cords are available and may be used if care is exercised in their
use.
B. If an extension cord is used,
(1) the marked electrical rating of the extension cord should be at least as great as the electrical-
rating of the appliance,
(2) the cord should be arranged so that it will not drape over the counter top or table top
where it can be pulled on by children or tripped over unintentionally.
C. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does
not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
In the interest of improving products, Krups reserves the right to change specifications without
prior notice.
4