AR AWSEE2 Guide De Démarrage Rapide page 8

Tour of the Premier Series wireless speaker
Back
On/Off button turns the speaker on and
off.
Pair button initiates pairing with a
Bluetooth device.
Volume – and + buttons increase or
decrease the volume of the speaker's
audio.
Status indicators show the connection status of each speaker.
If you're using the Single-Speaker Setup:
Solid blue means the speaker is connected via Bluetooth.
Fast blinking blue means the speaker is ready to pair via Bluetooth.
Slow blinking blue means the speaker is reconnecting via Bluetooth.
Solid white means an audio cable is plugged into the Aux In jack.
If you're using the Stereo Setup (2 Speakers):
Solid white means the right speaker is linked for stereo sound.
Slow blinking white means the two speakers are trying to link for stereo
sound.
Fast blinking white (left speaker only) means this speaker is ready to
pair via Bluetooth.
Solid blue means an audio cable is plugged into the Aux In jack.
DC In jack connects to the AC adapter provided to power the speaker.
Left-Mono-Right switch lets you set up two speakers as a stereo pair (Left and
Right). Otherwise, this switch should be set to Mono.
Aux In jack lets you connect directly to the speaker to listen to an audio source.
Bottom
Battery compartment (not shown) holds 8 AA batteries (not included) to power
the speaker if desired.
8