Adi-300 Digital Radio Adapter Installation; Connecting To Your Audio System - Autoleads ADI-300 Mode D'emploi

ADI-300 Digital Radio Adapter Installation

Vent Mount Holder

Connecting to your Audio System

There are two options to connect the ADI-300 to your in-car audio system.
You can connect using the 3.5mm auxiliary cable to the auxiliary connection of
your audio unit, or connect by transmitting the audio wirelessly to an available
FM frequency.
It is recommended to use the 3.5mm auxiliary cable for best performance.
u
You will need to check if an AUX Input is available on your in-car system.
For more information, see your existing audio system user guide.
The ADI-300 will wirelessly transmit DAB and Bluetooth calls & audio via FM.
u
You can set the transmission frequency between 87.6-107.9 MHz and set your
audio system to the same frequency to receive digital radio and audio from the
ADI-300.
Press the TX/SCAN button to show the current FM transmitting frequency.
u
Turn the rotary button to adjust the transmitting frequency manually.
u Switch the car radio's FM frequency to the frequency set on the
DAB/DAB+ receiver, for the sound to be received by the audio system.
12v Flexi Mount Holder
7