Care, Maintenance, Storage And Transport; Troubleshooting; Warranty And Liability - Fixpoint AP 2 Notice D'utilisation

7 Care, Maintenance, Storage and Transport:

ATTENTION! There is a risk of electric shock, short circuit and burnings!
• Always disconnect the mains plug from mains and let the device cool down!
• Use a dry cotton cloth to clean your product, or use a slightly moist cloth for heavy
stains. Look out for live cables of your device during cleaning! Do not use any cleaning
supplies and avoid liquid entry to the device.
• Make sure there is sufficient space around the system to ensure proper ventilation during
work breakes and cooling down.
• Avoid places with high temperatures, humidity, or places which can become wet, also
during care, maintenance, storage, and transport.
• Mind the notes on safety also regarding care, maintenance, storage and transport.
• Keep the product away from children!
• Reposit the original packaging as protection from dust and humidity for transporting.
• Follow the safety symbols on the packing during transport.
• In case of transporting the the soldering station from cold to warm rooms the sudden
change of temperature may lead generating condensation water causing negative
effects or damages to the electronics of the device. Only switch on the soldering station
when having adapted to room temperature.

8 Troubleshooting:

Problem
The soldering station does not heat up.
No good soldering joint is practicable.
The temperature is hard to adjust.
other questions

9 Warranty and Liability:

• The producer grants a 2 years warranty to a new device.
• As the manufacturer has no influence on installation, warranty of the product only
applies to the product.
• If any fault or damage is detected on your device, please contact your dealer and provide
your sales slip or invoice as evidence of the purchase, if necessary. Your dealer will
repair the fault either on site, or send the device to the manufacturer. You make the work
of our technicians considerably easier, when you describe possible faults in detail – only
then you can be assured that faults occurring only rarely will be found and repaired with
certainty! If your dealer cannot be contacted, you can also contact us directly.
• The manufacturer is not liable for damages to persons or property caused by improper
installation or operation not described in this guide. This includes, among others, any
alteration and modification of the product and its accessories.
• Any use other than described in this user's guide is not permitted, and causes loss of
warranty, loss of guarantee, and non-liability.
• We reserve our right for misprints and changes of the device, packing, or user manual.
Help
Check the mains connection and the adjus-
ted temperature at the rotary switch.
Read chapter 6.4.
Read chapter 6.3 or consult your dealer.
Consult your dealer.
15