Bausch Proxima ISDN Lite Manuel D'installation page 63

Proxima ISDN Lite Installatiehandleiding
In the 'Connected Line Identification Presentation' (COLP) screen, the caller's
phone number needs to be filled out. This number will show up on the display on
the other side, even before the phone is being answered. When you choose for
main number, the main number will appear.
CLIP = to display an incoming number.
COLP = to display an outgoing number. This number will be an incoming number
(CLIP) on the other side.
The Default data protocol indicates which B-channel protocol will be used as
default when the Proxima ISDN Lite is turned on, or when you reset it.
Click Next for the following screen.
By clicking Finish the configuration settings will be send to the Bausch Proxima
ISDN Lite.
30/11/1999 Bausch Datacom
63