Vankyo 530W Manuel D'utilisation page 17

Wifi Setting
Projection Image Setting
Language Setting
System Update
Other Setting
About
PROJECTION DISTANCE&SIZE
The recommended projection distance varies with different projection contents.
•
Please adjust the distance between the wall/screen and the projector properly as
needed.
Ambient darkness will improve the clarity of the projected images.
•
Connect the projector to your router´s WiFi
1. Change Projection Mode among Front-Desktop, Rear-
Desktop, Front-Ceiling and Rear Ceiling.
2. Enter Keystone Advanced (Front/Side) to correct image
distortion.
3. Enter Digital Zoom and use the Up/Down button to
enlarge/reduce the image.
Select a language for the projector.
1. Local Update: Update the firmware version via a USB
disk with upgrade file named as RY-3H017.bin. (Contact
our costumer service to get the upgrade file.)
2. Online Update: Update the firmware version online
when a new version is available.
3. Restore Factory: Restore the projector to the factory
settings.
1. Power on Option
If you select Direct, the projector will directly
•
power on when you plug its power cord into an
electrical outlet for the next use.
If you select Standby, you need to press to turn
•
the projector on when you plug its power cord
into an electrical outlet for the next use.
2. Scheduled Shutdown
Set the time duration for the projector to shut
•
down automatically. Option include Off, 10min,
20min, 30min, 60min and 120min.
Check the System Version and MAC Address of the
projector.
17