Welding; Welding Parameters; Maintaining The Welding Machine - AXXAIR SATO-115E5X Notice Originale

INNOVATIVE ORBITAL SOLUTIONS

9.3. Welding:

Welding is performed as follows:

Position the tube.

Position and tack weld on the two
elements to be welded.

Align the surfaces to be welded and the
electrode.

Purge the system to evacuate any
oxygen in the hoses and the weld head
(perform this step when using the
machine for the first time or when the
system has not been in service for a
long period of time).

Ensure internal tube inertisation (refer
to the systems
AXXAIR).

The starting position is "the initial position".

Choose the appropriate welding program.

9.4. Welding parameters:

The AXXAIR SAXX series has an automatic welding parameter calculation mode. When choosing the
weld head, use either SATO-115E or SATO-170E or SATO-220E.
Refer to the generator user's manual.

10. Maintaining the welding machine:

Prior to each use of the machine, visually inspect the electric/water hose pack. Replace if necessary.

Maintenance operations should be performed by qualified personnel using original replacement
parts.

Before any maintenance operation, disconnect all power sources.

Store and transport the machine, including all accessories, using the original shipping case.

Always keep the machine clean for optimum performance.
Never insert any foreign bodies into the machine rotation system.
Inspect the condition of the rotor contact surface on the horseshoe housing. If needed, clean surfaces
using red Scotchbrite™ pads.
It is important to check the condition of the hoses connecting the weld head to the welding station to avoid
any water or gas leaks.
WARNING:
ONLY USE COOLANTS RECOMMENDED BY AXXAIR. NEVER ADD WATER TO THE COOLANT
TANK BECAUSE THIS MAY RESULT IN CHEMICAL REACTIONS THAT MAY DAMAGE THE
MACHINE AND VOID THE WARRANTY!
Join experience
0
recommended by
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
- 21 -
English