Connecting An Ipod - Samson EXPEDITION XP25i Manuel Du Propriétaire

Follow these simple steps for using an iPod with your XP25i portable PA sys-
tem.
1. Slide the iPod compartment
door up to remove.
2. Install your iPod into the
XP25i by sliding the iPod
onto the connector. Be sure
the iPod is seated properly
and that it has made a solid
connection in the dock.
3. Align the iPod protective
bracket with the grooves on
either side of the compart-
ment and slide into place.
4. With the iPod playing,
rotate the iPod Level control
clockwise until you reach the
desired volume level.
Owner's Manual

Connecting an iPod

XP25i
7