Publicité
Les langues disponibles
Les langues disponibles
Technical details
Battery Type:
Power Output:
Cables:
Compressor:
Output Socket:
Discription
1. Main switch
2. LED working-light
3. Carrying handle
4. 12V= outlet
5. Booster clamps
6. USB-port
7. Voltage reversal indicator
8. On-/off-switch for working-light and USB-port
9. Loading-socket
10. Loading indicator
11. Voltage checking button
12. Pressure meter
13. On-/off-switch for compressor
14. Pressure hose
15. Charging-adaptor 230V~/50Hz
16. Loading-adaptor for cigarette-lighter
17. Inflating-adaptors
Features:
Operation
Warning: Electrical shock can cause death or injury. Avoid touching exposed conductors of
electricity.
The Jumpstart System is designed only for use with vehicles and boats with 12V-system. You
can also use this system as a portable power supply of 12 VDC in remote areas or
emergencies.
To use the Jumpstart to start your vehicle
1. Make sure the vehicle or boat to be jump-started is not running and set the ignition „OFF".
2. Do not allow the black and red clamps (5) to touch. If this happens, it can melt clamps or
other metal objects.
3. Connect the RED clamp to the POSITIVE (+) terminal on the vehicle's battery.
4. Connect the BLACK clamp to a non-moving metal part of the engine, not to the negative
terminal of the battery.
5. In the event of improperly connected pole clamps, the LED (7) flashes red and a warning
signal is triggered.
6. Pay attention to the clamps being sufficiently fixed on the terminals.
Sealed, lead-acid, rechargeable, 7 amp-hours
12 VDC, 300 amps starting power (600 A peak)
Rubber insulaled ( #4) copper;
260 PSI (18 bar) maximum pressure
12 VDC cigarette lighter output
- AC/DC power pack
- inflating needle and air raft tips
- LED working light
GB - 9
Publicité
