Axis T8640 Mode D'emploi page 8

Page 8
Note:
• Available power is specific to the cable length, type, and power source used, and
is calculated automatically on connection. For example, to ensure reliable
power delivery to a PoE IP camera whose maximum power requirement is 12
watts, check that the 15 watt LED is lit.
• If installing a PTZ camera, or any equipment whose power requirement can
change, check these LEDs while the equipment is drawing peak power, such as
when the PTZ camera is moving.
• For maximum PoE over coax power, connect an AXIS T8003 PS57 power supply
to the Base unit. If more power is required than the cable can carry, the power
supply can be connected to the Device unit.
AXIS T8640