Strong Helo B-KIT Guide D'installation Rapide page 8

EN
2 Enter your verifi cation code
3. Connecting Device
1 Use the Ethernet cable to connect the Base Station to
Router's LAN port.
2 Plug the adapter to the power outlet to power on the base
station. The Indicator light 1 will change from solid red to blink red
when the base station is ready for pairing.
Internet
1. Need one router connecting to internet
2. Need an Uplink connection with at least 2 Mbps
speed
Enter verification
code
A verification code has been sent to your email:
abcd@abcd.com, Resend(51s)