Button Functions - Magnavox MRU1400 Manuel D'instruction

Button Functions

1.
2.
3.
4.
5.
6.
7.
8.
Note: The REC button must be pressed TWICE to
record from your VCR. For some brands of VCRs, you
might need to press the REC button once, then press it
again for three seconds.
Some buttons on the remote might have functions that
are referred to by different names on the device you are
controlling. E.G. PREV.CHAN may be called RECALL, or
ENTER may be called DISPLAY. These differences
depend on the brand and model of your product. Also,
this remote can only operate features that exist on your
product. E.G., your product must have PREV.CHAN
ability for the PREV.CHAN button to operate this
feature.
MRU1400-OM_H14100.pmd
16.
15.
14.
13.
12.
11.
10.
9.
4
4-5
Button Functions, cont.
1. Red Indicator Lights when any button is pressed.
2. TV, VCR, CBL, DVD Selects product to be oper-
ated. QUIT Used to exit menu functions.
3. MUTE Turns off the TV sound while the picture
remains. OK Selects menu items for the device you
are controlling.
4. CODE SEARCH Used for setup.
5. SLEEP Turns off the TV after a period of 1 to 99
minutes.
6. NUMBERS Enter numbers for direct channel
selection. Some products require Enter to be
pressed after channel selection.
7. ENTER Used after direct channel number entry to
immediately change to the selected channel.
8. SCAN + and SCAN - buttons control the speed of
Fast Forward and Reverse Playback respectively in
DVD mode.
9. RECORD, PLAY, STOP, REW, FF, PAUSE
VCR control buttons operate your VCR even when
the remote is set to operate the TV. Also operates
DVD Scan -/+.
10. TV/VCR/INPUT For some TVs, press repeatedly to
select from available viewing sources (antenna,
cable box, VCR, etc.).
11. POWER Turns product On or Off.
12. CC (SUBTITLE) TV Closed Caption (if your TV has
this feature) or DVD Subtitle toggle.
13. PREV. CHAN Returns to the previously selected
channel, or DVD repeat toggle.
14. VOLUME UP/DOWN Changes the volume level of
the product, normally the TV.
15. MENU IN/OUT Toggles in and out of menu mode.
Accesses the Menu functions of the device you are
controlling.
16. CHANNEL UP/DOWN Changes the channels.
CHAPTER +/- controls DVD/CD track selection i.e.
DVD/CD Track Skip Up/Down (in DVD and SAT
modes). Note the VCR buttons also control DVD
when in DVD Mode.
9/6/2006, 3:17 PM
5