Need More Help - PURE Jongo A2 Guide De Démarrage Rapide

Why does the power light on my Jongo change colour?
The power light on the front of Jongo is used to tell you about Jongo's status. The list below
explains some of the common colours that you may see when setting up and using your Jongo.
Green (steady): Jongo is ready to play your music or is already playing a track.
Green (pulsing): Jongo is in Wi-Fi setup mode (you'll see this when powering up your Jongo for
the first time) or Jongo is busy. The power light will turn steady green when Jongo is ready to play
your music.
Amber (steady): Jongo is in sleep mode. Jongo will automatically wake up and play your music
when you try to stream a track from your smartphone or tablet.
Red (flashing): Jongo cannot connect to your Wi-Fi. Check that you are within range of your Wi-
Fi network and that you have entered the correct password (matching any upper and lower case
letters) and run Jongo Setup again. To get more help with setting up your Wi-Fi, visit our support
site at support.pure.com.

Need more help?

If you need more help setting up your Jongo, you can visit our support site at:
support.pure.com
EN
13