Switching Off - F.F. Group CMG 12V EASY Notice Originale

Switching off:

Set the ON/OFF switch (1) with the speed control to the "OFF" position.
NOTES ON wORkING wITh mATERIALS/TOOLS/SpEED RANGE
ƒ Use the milling bits (19) for working on steel and iron at maximum
speed.
ƒ Determine the rotational speed range for working on zinc, zinc alloys,
aluminium, copper and lead by trying it out on test pieces.
ƒ Use a low rotational speed for work on plastics and materials with a low
melting point.
ƒ Use a high rotational speed for working on wood.
ƒ Carry out cleaning, polishing and buffing work in the medium speed
range.
The following are recommendations only and not binding. When carry-
ing out practical work, carry out your own tests to see which tool and
which settings are ideal for the material you are working on.
SETTING A SUITABLE ROTATIONAL SPEED:
Number on
the speed
control (2)
1-3
4-5
5
Material being
worked
Plastics and ma-
terials with a low
melting point
Stone, ceramics
Soft wood, metal
Number on
the speed
control (2)
6
Max.
www.ffgroup-tools.com
English | 15
Material being
worked
Hardwood
Steel