PNI Clementine Bus Truck 8524BT Manuel Utilisateur page 4

EN
TROUBLESHOOTING:
1. The unit doesn't start
- check the ISO connection - power cables
2. The power button doesn't work
- press the Reset button on the front panel; if it still doesn't work, unplug the power
and plug it in again after a while
3. No sound or just noise coming from the speakers
- check the ISO connection, speaker cables or sound settings
4. Low quality sound
- check the ISO connection, speaker cables
5. Poor radio reception
- check the radio antenna connection
SPECIFICATIONS:
FM / AM Radio
RDS
Frequency
Sensitivity
Stereo separation
Signal-to-noise ratio
Supported files
Distortion
Signal-to-noise ratio
Radio station memory
Maximum audio power
Digital clock
ISO Connector
Bluetooth
Dimensions
Power voltage
Standby current
Working temperature
WARNINGS:
Installing this player on a car should be done by qualified personnel after checking the
type of power and audio connectors on the car.
Some cars are equipped with different sockets configured against ISO standards (different
thread positioning).
If the vehicle is not equipped with international standard ISO connectors, the necessary
modifications should be made by qualified personnel before fitting the player.
Yes
Yes
FM 87.5-108.0 MHZ 50 KHZ / AM 522-1620
KHZ 9 KHZ
<= 20 dB
>= 25 dB
>= 60 dB
MP3, WMA
<= 0.3%
>= 60dB
18 FM/12 AM radio stations
4x45W
Yes
Yes
Yes
188x122x50 mm
12V / 24V
max. 10A
-20°C~+60°C
4