CTA PAD-SWM Manuel De Produit page 2

Using the bracket:
1) Mark hole placement, then drill holes into desktop or wall. Screw in through holes in the
base to mount.
Mounted on the desktop
2) Pull lock catch back and pull the sliding clamp open to install tablet.
3) Place tablet corner diagonally into the fixed clamp end, then push sliding clamp in until
it is firmly cradling the tablet at the opposite corner.
Holder
2
2
4) Push the lock catch back in, then turn the key to lock in place.
4
Screws (4 pcs)
support@ctadigital.com
Mounted on the wall
Tablet
Screws
(4 pcs)
1
Sliding clamp
Push
3