Before First Use - Daewoo DGS1502PK Mode D'emploi

•
Always turn the appliance to the 'OFF' position, switch off at the power outlet, unplug at the power outlet and
remove the power cord, if detachable, from the appliance and allow all parts to cool.
•
Do not place this appliance on or near a heat source, such as hot plate, oven or heaters.
•
Position the appliance at a minimum distance of 20cm away from walls, curtains and other heat or steam
sensitive materials and provide adequate space above and on all sides for air circulation.
PARTS
USING YOUR GARMENT STEAMER

Before first use

Remove any sticker or protective cover from the steam head.
Unwind and straighten the cord before use.
When operating the garment steamer for the first time, allow it to steam for a few minutes. this will remove any
impurities and odours that might have been left by the manufacturing process.
When operating the garment steamer for the first time, you may want to try the steamer on an old piece of
fabric before steamer on an old piece of fabric before steaming your garment.
WARNING: to avoid an electrical circuit overload, it is recommended that no other appliances are plugged into
the same circuit as your garment steamer when it is in use.
NOTE: when unpacking the garment steamer, check to see you have received all the items listed in the parts
list, before discarding the packaging.
Assembling/operating your garment steamer
1. Press the water tank release button, pull out the water tank, open the water inlet cover and fill tap water into
the water tank until it reaches the MAXIMUM level (see flg.1).always ensure the water tank is at least a third full.
1. Water tank 280ml (removable)
2.Water tank release button
3. Steam button
4. Steam lock switch
5. Steam head
6. Fabric brush (removable)
7. Power indicator light
8. Cord guard
4