Technical Specifications - Ceado V90 Manuel D'utilisation

GB

Technical specifications

MODEL V90
Power Voltage
W
150
MODEL V100
300
MODEL G30 AUTOMATIC ICE CRUSHER
300
The EC declaration of conformity for this appliance is available in the Products section of our
website www.ceado.com.
INSTALLATION
Comply with the safety recommendations indicated above and hereafter when installing the
appliance.
1. Make sure that the mains voltage is as indicated on the rating label of the appliance and that
the electric system is grounded and equipped with a differential switch.
2. Install the appliance in a DRY, PROTECTED place, far from water sprays or splashes, heat
sources, open flames and inflammable substances.
Place the appliance on a flat, horizontal, stable surface where it cannot tip over.
3. Make sure the switch on the appliance is in the "OFF" position and plug it into a socket
protected by a magneto thermal switch or fuses.
Do not use a multiple outlet plug.
4. Stretch the power cable out to full length. Do not let it pass over sharp edges or hot surfaces.
Do not let oil spill on it. Do not let the power cable hang loose from the counter on which the
appliance stands.
USE
Models V90 and V100
Before first use: rinse all of the parts that will have contact with food in running water i.e.:
container, lid, filler cap, spout, tray.
1
Make sure the switch is in the "OFF" position.
2 On model V90, place an empty container under the spout.
3
Place the ice cubes in the container.
On model V90, fit the lid on the container so that the magnetic sensor is in contact with the end
4
of the safety arm (Fig. 5). On model V100, fit the lid so that the magnetic sensor is between the
two positioning screws (Fig. 6).
Dimensions
V/Hz mm
230/50 210x230x460 h
230/50 240x340x470 h
230/50 450x210x430 h
Net weight Gross weight
kg kg
4,2 5,1
15,5 16,8
9,2 10,5
15
Output
kg/h
120
360
120