Giesecke & Devrient StarSign Key Fob Manuel De L'utilisateur page 4

3. Charge the StarSign Key Fob using the USB cable provided (or any other
USB type C cable) until the battery LED emits a constant blue light.
Please re-charge the StarSign key fob if the battery LED blinks
blue fast.
4. Download and install the Enrolment Application from the App Store using your
mobile device by scanning the QR code printed on the side of the packaging
box.
5. Switch on the StarSign Key Fob by firmly pressing the button on the side for 3
seconds. The LED will blink yellow.
6. Please ensure that Bluetooth is enabled on your mobile device, then start the
Enrolment Application on your mobile device. Wait until the StarSign Key Fob
is in connectivity mode (LED shows a constant yellow light).
StarSign Key Fob User Manual, Public
4/101