Setup
Power on
1. Connect NVR with power outlet and turn on the power button.
Use stable power supply to avoid device exception or even damage.
2. Wait until the Wizard interface appears on the Monitor and set the password (For the first time access).
It is recommended to set new password for better security.
3. Log in the NVR.
• A dmin password is the verification code on the lable of the device.
• I f the wizard does not appear, please check the steps above.
(Optional) Shutdown
1. In the operation interface of NVR (Monitor), go to Shutdown by Menu
2. Click Yes.
For device protection, do not turn off or disconnect the power supply while the device is working.
Power Button
Power Adaptor
3
Power Outlet
Shutdown and click it.