Assembling Process
If to fix the heater on the floor, bore four holes in the floor,
fix the heater by four wedge bolts on the floor and tighten the
screws by spanner.
This warning symbol indicates that the surface is hot
and caution is required.
This warning symbol indicates that the heater
should not be covered.
Operation
Connect the power cable to a 220-240V 13 A supply that is located
in a safe, dry area. Then press the power switch on the heater
when the plug had been connected.
Press the touch switch one time to operate the heater
on 1200W.
Press the touch switch a second time to switch it off.
Complete!
Although the patio heater is shower proof, do not use when raining or in wet
conditions.
Always disconnect the power cable from the electrical supply, when the patio heater
is not in use.
•
Care and maintenance
•
When disconnected from the electrical supply, clean the outside of the patio heater
with a damp cloth. Never use corrosive or solvent cleaners or immerse in water.
•
Any maintenance or repairs including replacing the halogen tube should only be
carried out by a qualified electrician or by a recommended service center.
STORAGE
If the heater will not be used for a long period of time, store it in a cool, dry location when
not in use. To prevent dust and dirt build-up, use the original packaging to repack the unit.
TROUBLE SHOOTING
If the heater will not operate, please check the following before seeking repair of service:
Check if the power cord is plugged into an electrical outlet,
if not, plug in.
Check if electricity to the main fuse is working.
Make certain the power switches are turned on.
If not, choose a setting.
WEEE
This symbol on the product or in the instructions means that your electrical
and electronic equipment should be disposed at the end of its life separately
from your household waste. There are separate collection systems for
recycling in the EU. For more information please contact the local authority or
your retailer where you purchased the product.