Operation; Setting - Well Health DT-8836M Mode D'emploi

10. Operation

•
Input the battery.
•
Waiting for 10 minutes for the first time or just insert the battery.
•
In case when it's not used for long time, it will detect the environment temperature first so it will take
one or two seconds more to switch ON.
•
Focus on the forehead and keep 1 to 3 cm distance then press the button to start testing. It will display
the testing data within one second. Be sure there is no hair, sweat, cosmetic or hat to cover the
forehead.
The forehead measurement mode is the estimation mode, the object temperature measurement
mode is the calibration mode, press "MODE" key to switch the estimation mode or the position
deviation corresponding to the calibration mode is the forehead for estimation. The statistical method
of the calculation mode is to use the infrared radiation emitted by the human forehead for sampling
processing use the compensation method to calculate the compensation human body temperature and
then through the electronic components turn the information in into a temperature reading.
7
■
When the environment impact the forehead temperature too much please check the part behind the
ear and make sure it's not block by anything.

11. Setting

■
Setting the format of the temperature --- Fl
Keep pressing "MODE" for 3 seconds till the screen display Fl, the press" "to choose 'C and" "for
'F.
■
Alarm temperature setting --- F2
Keep pressing "MODE" for 3 seconds till the screen display Fl then press "MODE" again to enter in to
F2 then press" "for increasing alarm temperature
(0.l' F).
Attention: The default alarm temperature is 38
■
Buzzer ON / OFF --- F3
Press "MODE" button for 3 seconds till the screen display Fl then press "MODE" twice to enter in to F3
the press" "to close the buzzer (a sound icon " "disappear) and press" "to open the buzzer (a
sound icon" "is displayed on the LCD screen).
0.l' C (0.l' F) and press" "for decreasing
' C (100.4 ' F).
8
0.l' C