Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7. RESTORING DEFAULT PARAMETERS
1. Press and hold the RESET button.
2. Hold the RESET button for approx. 5 sec. and watch the LED indicator
quickly flash.
TERMS OF USE
The following terms and conditions govern use of the EWP3 device and contains important information on limitations regarding the product's
use and function, as well as information on the limitations of the manufacturer's liability.
Please carefully read these terms and conditions. For more information on your product, please visit www.eldesalarms.com
TECHNICAL SUPPORT
In order to ensure continuous and proper operation of the EWP3 device and uninterrupted service, it is the responsibility of the User to make
sure that: (I) the product is properly installed, and (II) there is constant electrical supply (low batteries must be replaced in time). If you experience
difficulty during the installation or subsequent use of the system, you may contact "ELDES, UAB" distributor or dealer in your country/region.
For more information see www.eldesalarms.com
SAFETY INSTRUCTIONS
Please read and follow these safety guidelines in order to maintain safety of operators and people around:
EWP3 WIRELESS MOTION DETECTOR v1.1
3. Release the RESET button.
4. Parameters restored to default.
23
Publicité
Table des Matières
