Wiring Instructions - FloTech FT390 Mode D'emploi

WIRING INSTRUCTIONS:

Wire the sockets to the on-board monitor according to Diagram 2 below. Double-check
your wiring connection when complete.
If you are connecting a FT390Pxx Plug & Play version, apply grease (supplied with each
unit) to the plug. Connect the connector on the FT390Pxx to the connection on the
Onboard Monitor; be sure to align the connector cut outs. The connector should plug
together easily. DO NOT FORCE. Attach the White retaining clip to hold the
connectors together.
PATENT PENDING
For Technical Assistance Call 877 582 3569
DIAGRAM 2
Dixon Bayco
4690 Interstate Dr. Suite F, Cincinnati, OH 45246
Rev: July 2011 PH: 513 874 8499 FX: 513 874 8399 Page 3 of 5