Optional Accessories - Makita 9557NBR Manuel D'instructions

MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and unplugged before attempting to
perform inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.

OPTIONAL ACCESSORIES

CAUTION:
These accessories or attachments are recommended for use with your Makita tool spec-
ified in this manual. The use of any other accessories or attachments might present a risk of injury to persons.
Only use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
►Fig.16
-
1
2
3
4
5
6
7
8
9
10
11
12
13
14
-
NOTE: *1 In some European countries, when using a diamond wheel, the ordinary guard can be used instead of the
special guard covering the both side of the wheel. Follow the regulations in your country.
NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from
country to country.
Air vent cleaning
The tool and its air vents have to be kept clean.
Regularly clean the tool's air vents or whenever the
vents start to become obstructed.
► Fig.15: 1. Exhaust vent 2. Inhalation vent
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
115 mm (4-1/2") model
Wheel Guard (for grinding wheel)
Inner flange / Super flange
Depressed center wheel / Flap disc
Rubber pad 100
Sanding lock nut
Wire wheel brush
Wire cup brush
Wheel Guard (for cut-off wheel) *1
Abrasive cut-off wheel / Diamond wheel
Lock nut wrench
11 ENGLISH
125 mm (5") model
Grip 36
Lock nut
Back up pad
Flex wheel
Rubber pad 115
Abrasive disc