Remington A0 Notice D'utilisation page 10

Premium Drive Control
(If Equipped)
The premium drive control is located on the
upper handle and is used to engage the drive.
Pushing the control forward will engage
the drive. The farther the control is pushed
forward, the faster the mower will propel. Once
pressure is released from the control it will
return to the neutral position and the drive will
be disengaged.
Cutting Height Adjustment Lever
One adjustment lever is located on the right
rear wheel and one is located on the right front
wheel. Both levers must be at the same relative
position to ensure a uniform cut. To adjust
the cutting height, refer to Cutting Height
Adjustment on page 7.
NOTE: On select models, the front cutting
height adjustment lever is located above the
front left wheel.
Grass Catcher (If Equipped)
The grass catcher, located at the rear of the
mower, is used to bag the grass clippings for
disposal. Once the bag is full, remove it up
through the handles using the grass catcher
handle and empty it.
Mulch Plug (If Equipped)
The mulch plug is used for mulching purposes.
Instead of collecting the grass clippings in
a grass catcher or using the side discharge
chute, some mower models have the option
of recirculating the clippings back to the lawn.
This is called mulching.
Side Discharge Chute
(If Equipped)
Your mower may be shipped as a mulcher.
To discharge the grass clippings to the side,
follow the instructions in the Side Discharge
Chute section on page 7 to attach the side
discharge chute.
WARNING: Keep hands and feet
away from the chute area on
cutting deck. Refer to warning
label on the unit.
Deck Wash (If Equipped)
Your mower's deck may be equipped with a
fast attach deck wash nozzle on its surface
as part of its deck wash system. Use the deck
wash to rinse grass clippings from the deck's
underside.
Recoil Starter
The recoil starter is attached to the right upper
handle. Stand behind the unit and pull the
recoil starter rope to start the unit.
10 S 3 — c
ection ontrolS
Electric Starter Push Key
(If Equipped)
The electric starter push key is located on
the right side of the upper handle. It is both
a removable key and push button and is only
provided on electric start models.
NOTE:
On select units, the electric start is
activated by a removable turn key.
Starting & Stopping Engine
Refer to the Engine Operator's Manual for
instructions on starting and stopping the
engine.
Using Your Lawn Mower
Be sure lawn is clear of stones, sticks, wire,
or other objects which could damage lawn
mower or engine. Such objects could be
accidently thrown by the mower in any
direction and cause serious injury to the
operator, others, or the equipment.
Bail Drive Control
1. Once the engine is running, squeeze
the bail drive control against the upper
handle to propel mower.
2. Release the bail drive control to stop
mower from propelling.
Single Lever Drive Control
1. Once the engine is running, squeeze
the single lever drive control against the
upper handle to propel mower.
2. Release the single lever drive control
to slow down or stop mower from
propelling.
Dual Lever Drive Controls
1. Once the engine is running and while
continuing to hold the blade control
down, squeeze either (or both) drive
controls against the upper handle to
propel mower. See Figure 3-2.
2. Release the dual lever drive controls
to slow down or stop mower from
propelling.
& o
peration
Engage the right, the left, or
both the right and left control
levers to propel the mower.
Figure 3-2
Premium Drive Control
1. Once the engine is running and while
continuing to hold the blade and drive
controls together, push the drive control
forward to propel mower. The farther
the control is pushed forward, the faster
the mower will propel.
2. Once pressure is released from the
control it will return to the neutral
position and the drive will be
disengaged.
NOTE: For ease of use, while gripping
the controls, simply lock your wrist
and elbows and walk - the unit will
automatically adjust to your speed.
WARNING: The operation of any
lawn mower can result in foreign
objects being thrown into the
eyes, which can damage your
eyes severely. Always wear safety
glasses while operating the
mower, or while performing any
adjustments or repairs on it.
Using as Mulcher (If Equipped)
For mulching grass, remove the side discharge
chute (if equipped) or the grass catcher (if
equipped) and allow the rear discharge door (if
equipped) to close the rear opening of mower.
For effective mulching, do not cut wet grass. If
the grass has been allowed to grow in excess
of four inches, mulching is not recommended.
Use the grass catcher to bag clippings instead.
Using Grass Catcher (If Equipped)
Use the grass catcher to collect clippings while
you are operating the mower.
1. Attach grass catcher following
instructions in the Grass Catcher section
on page 7. Grass clippings will
automatically collect in bag as you run
mower. Operate mower until grass bag
is full.
2. Stop engine completely by releasing the
blade control. Make sure that the unit
has come to a complete stop.
3. Lift discharge door and pull grass bag up
and away from the mower to remove the
bag. Dispose of the grass clippings and
reinstall the bag when complete.
WARNING: If you strike a foreign
object, stop the engine. Remove
wire from the spark plug,
thoroughly inspect mower for
any damage, and repair damage
before restarting and operating.
Extensive vibration of mower
during operation is an indication
of damage. The unit should be
promptly inspected and
repaired.