Nutri Ninja BlendMax DUO BL2000 Serie Instructions page 7

37 If you find unmixed ingredients sticking to
the sides of the pitcher, stop the appliance,
remove the lid, and use a spatula to dislodge
ingredients. NEVER insert your hands into
the pitcher, as you may contact one of the
blades and experience a laceration.
38 DO NOT attempt to remove the container
and lids from the motor base while the
motor and blade assembly is still spinning.
Allow the appliance to come to a complete
stop before removing lids and containers.
39 Upon completion of processing, ensure that
the stacked blade assembly is removed
BEFORE emptying pitcher contents. The
stacked blade assembly is to be removed
by grasping the top of the shaft and lifting
from the pitcher. Failure to remove the
stacked blade assembly before emptying
the pitcher results in a risk of laceration.
SAVE THESE INSTRUCTIONS
40 Remove the Pro Extractor Blades
Assembly from the Nutri Ninja
completion of blending. Do not store
ingredients before or after blending them in
the cup with the blade assembly attached.
Some foods may contain active ingredients
or release gases that will expand if left in
a sealed container, resulting in excessive
pressure buildup that can pose a risk of
injury. For ingredient storage in the cup,
use only Spout Lid to cover.
41 If the appliance overheats, a thermal switch
will activate and temporarily disable the
motor. To reset, unplug the appliance
and allow it to cool for approximately 15
minutes before using again.
42 The maximum wattage rating for this
appliance is based on the configuration
of the stacked blade assembly and MAX
88 oz. Total Crushing
configurations may draw less power or
current.
n i n j a k i tc h e n . c o m
®
Cup upon
®
Pitcher. Other
®
6