Water Drainage - GO/ON A007G-07C Mode D'emploi

Original instruction manual
· Under dehumidifying mode, fan speed is low.
Timer mode
· Under standby mode, press "TIMER" to setup the power-on time. Timer indicator turns on.
· Under power-on mode, press "TIMER" to setup power-off timer. Timer indicator turns on.

WATER DRAINAGE

This machine with auto-water-evaporating system. Condensed-water cycle to cool down the
condenser, which will not only improve cooling efficiency, but also save energy.
· If inner water tank is full, "W.F" indicator will flashed on the screen, machine enter into
standby mode, buzzer shouts, compressor stops and all keys is invalid till machine recovers
to be normal .
· Power off the machine: Pull out the water stop and rubber plug to drain out water, and restart
it, the machine will runs normally.
MAINTENANCE
Note: in order to avoid electric shocks, please power-off the machine and pull out plug before
maintenances or repairs.
Cleaning
· Please pull out plug before cleaning.
· Use soft semi-dry cloth to clean the machine. Don't use chemical agents, such as
benzene, alcohol, gasoline and so on; otherwise the machine surface will be
damaged, or even the machine itself.
· Don't spatter water into the machine.
Season Cleaning
If the machine will be unused for a long time, please do as following:
· Pull out drainage plug to flow out water.
· Let the machine runs under fan mode for 2 hours to dry out the machine internal
· Turn off machine and pull out plug.
· Clean and dry filters, then reinstall them.
· Pull out exhaust pipe for safekeeping.
· Put the machine into plastic bag, and place it on a dry place.
7
En
10/2018