B-Air VENT VP-20 Manuel D'instructions page 3

B-AIR.COM
Operating Instructions
The B-Air Vent VP-20 Centrifugal Air Mover is packaged and ready to be
put to work. The VP-20 requires no assembly.
The VP-20 is intended to be used for drying carpet spills, drying surfaces such
as bathroom, garage or room floors, ventilating as well as circulating air, and
drying hard-to-reach areas such as under a leaky sink or inside damp cabinets.
Just place the unit on the surface that needs to be dried, plug the unit into a
grounded outlet and select the desired speed and position (0º, 45º or 90º].
Maintenance
WARNING: As with all electrical equipment, the unit must be disconnected
from power before servicing or cleaning.
Before each use, inspect the unit for damage, blocked inlets and exhaust
and for foreign material buildup.
When the Vent VP-20 is turned on, inspect the unit for excessive vibration.
In the event of excessive vibration or if the fan wheel rubs against the
rotomolded housing, immediately turn off the unit and have a certified
technician inspect the unit.
Servicing
In order to receive service or replacement parts under warranty, you must:
a. Call for an RMA (Return Merchandise Authorization Number) at B-Air.
b. Have proof of purchase.
Upon inspection, we will advise you of the repairs needed and the cost (if
Applicable). B-Air will issue repair or replacement parts depending on warranty.
Limited Warranty
Warranty covers against defects in material and craftsmanship used under
normal intended use to original purchaser for a term of (2) two year from the
original date of purchase including parts, labor and 1-way shipping. Housing
is covered for a term of (5) five years from the date of the original purchase.
IMPORTANT!
Warranty does not cover signs of misuse including, but not limited to rough
handling, abuse, tampering, improper voltage use and unauthorized
maintenance and repairs.