Télécharger Imprimer la page
Matco Tools MTCBTDOGB Mode D'emploi
Matco Tools MTCBTDOGB Mode D'emploi

Matco Tools MTCBTDOGB Mode D'emploi

Haut-parleur chien dansant sans-fils

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

BOCINA INALÁMBRICA PERRO BAILADOR
HAUT -PARLEUR CHIEN DANSANT SANS-FILS
DANCING DOG WIRELESS SPEAKER
Package Contents
a. Wireless Dog Speaker
b. Micro USB Charging Cable
FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY
THIS INSTRUCTION MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
READ THIS INSTRUCTION MANUAL CAREFULLY AND UNDERSTAND ALL INFORMATION BEFORE OPERATING.
• It is the responsibility of the owner to make sure all personnel read this manual prior to using the appliance. It is
also the responsibility of the appliance owner to keep this manual intact and in a convenient location for all to
see and read. If the manual or product labels are lost or not legible, contact Matco Tools for replacements.
If the operator is not fluent in English, the product and safety instructions shall be read and discussed
with the operator in the operator's native language by the purchaser/owner or his designee, making sure that
the operator comprehends its contents.
• Children shall not play unsupervised
• Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gasses or dust
• Risk of electric shock.
• Failure to heed these warnings may result in serious injury and/or property damage.
WARNING: This product can expose you to chemicals including
phthalate which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
ADVERTENCIA: Este producto le podrá exponer a ciertos
químicos, para incluir el ftalato, conocidos en el Estado de
California por ocasionar cáncer y defectos congénitos u otros
daños a la reproducción. Para mayores informes, visite:
www.P65Warnings.ca.gov.
MTCBTDOGB
MTCBTDOGP
Dance On/Off Button
Power On/Off
Play/Pause
Button
WARNING
LED Indicator
Copyright © Professional Tool Products, 2018
All rights reserved.
Charging
Port

Publicité

loading

Sommaire des Matières pour Matco Tools MTCBTDOGB

  • Page 1 If the manual or product labels are lost or not legible, contact Matco Tools for replacements. If the operator is not fluent in English, the product and safety instructions shall be read and discussed with the operator in the operator's native language by the purchaser/owner or his designee, making sure that the operator comprehends its contents.
  • Page 2 MTCBTDOGB, MTCBTDOGP DANCING DOG WIRELESS SPEAKER Charging The Speaker 1. Plug the charger cable into the charge port. 2. Connect the charger to a USB power source. The red indicator light will display during charging. If charging does not start, disconnect the charger and plug it in again. Charging the battery fully will take several hours.
  • Page 3 Si el manual o las etiquetas se hayan perdido o no sean legibles, comuníquese con Matco Tools por algunos repuestos. Si el operador no domina el idioma inglés, las instrucciones del producto y de seguridad le serán leídas y discutidas con el operador en el idioma materno del operador por parte del comprador/propietario o su designado, asegurándose que el...
  • Page 4 MTCBTDOGB, MTCBTDOGP BOCINA INALÁMBRICA PERRO BAILADOR Cargando la bocina 1. Enchufe el cable del cargador en el puerto de carga. 2. Conecte el cargador a la fuente de alimentación USB. La luz indicadora roja se desplegará durante la carga. Si no comienza la carga, desconecte el cargador y enchúfelo de nuevo. Se requerirán varias horas para lograr la carga completa de la batería.
  • Page 5 WARNING: This product can expose you to chemicals including Matco Tools pour les faire remplacer. Si l'utilisateur-opérateur de l'outil ne maîtrise pas bien l'anglais, les instructions relatives au produit et phthalate which is known to the State of California to cause cancer and birth defects or other reproductive harm.
  • Page 6 MTCBTDOGB, MTCBTDOGP HAUT-PARLEUR CHIEN DANSANT SANS-FILS Charging The Speaker 1. Branchez le câble du chargeur dans le port de recharge. 2. Connectez le chargeur à une source d'alimentation USB. Le voyant rouge sera allumé pendant le chargement. Si la recharge ne démarre pas, déconnectez le chargeur et rebranchez-le. Le charge- ment complet de la pile prendra plusieurs heures pour s'effectuer.

Ce manuel est également adapté pour:

Mtcbtdogp