Product Overview; Technical Data - Speaka Professional 2251516 Mode D'emploi

Product overview

No. 2251516
2
Output1 Output2
5
No. 2255588
1
Input
Output 4 Output 3
5V/DC 2A
4
1 Input LED 4 Power input
2 Output LED 5 HDMI output sockets
3 Power LED 6 HDMI input socket
Connection
No. 2251516
Output1 Output2
HDTV or HDMI Display
No. 2255588
HDTV / HDMI Display
Notes on HDMI input and output cables:
Always use high-quality HDMI cables.
The transmission quality depends on the quality and length of HDMI cables.
• 1080p: max. 10 m / 4K: max. 3 m
• Turn off all the devices that you want to connect to the HDMI splitter.
• Using suitable HDMI cables, connect the HDMI input socket (6) of the HDMI splitter to the
HDMI output of a playback device, for example, to the HDMI output of a satellite receiver,
DVD player or game console.
• Connect output devices to the HDMI output sockets (5) (e.g. HDTV or HDMI display).
5 V/DC, 1 A Input
3 4 6
2 7 3
Output 1 Output 2 Output 3 Output 4 OFF/ON Power
Output 2 Output 1 Input
5 6
7 On/Off switch
DVD
Operation
• Connect the round plug of the power adapter to the power input (4). Insert the power adapter
mains plug into a suitable mains socket.
• (No. 2251516): The product turns on and the power LED (3) lights up.
• (No. 2255588): Flip the On/Off switch (7) to the ON position to turn the product on. The power
LED (3) lights up.
- Flip the switch to OFF to turn the product off.
• Turn on the playback device. The input LED (1) lights up.
• Turn on the output devices (TV set, monitor). The corresponding output LEDs (2) light up.
1
Care and Cleaning
• Always disconnect the product from the power supply before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions as these can
damage the housing or impair the product function.
• Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be placed in household
waste. At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to protection of the environment.

Technical data

a) HDMI splitter
Input voltage ................................. 5 V/DC
Input current ................................. 1 A (No. 2251516)
Supported resolution .................... 480i to 1080p, 50/60 Hz /
Bandwidth ..................................... 600 MHz/6 Gbps per channel,
Frequency ..................................... 25 – 600 MHz
Colour depth ................................. 12 bit
Supported standards .................... HDCP, Full 3D, LPCM 7.1 CH,
Operating conditions ..................... 0 to +40 °C, 20 – 90 % RH (non-condensing)
Storage conditions ........................ -20 to +60 °C, 5 – 90 % RH (non-condensing)
Dimensions (L x W x H) ................ 65 x 62 x 21 mm (No. 2251516)
Weight .......................................... 105 g (No. 2251516)
b) Power adapter (No. 2251516)
Input voltage / current ................... 100 – 240 V/AC, 50/60 Hz, 0.3 A
Output voltage / current ................ 5 V/DC, 1 A
c) Power adapter (No. 2255588)
Input voltage / current ................... 100 – 240 V/AC, 50/60 Hz, 0.4 A
Output voltage / current ................ 5 V/DC, 2 A
DVD
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical state at the time of printing.
Copyright 2020 by Conrad Electronic SE.
2 A (No. 2255588)
1080p, 24/50/60 Hz /
VGA - UXGA, 4K 2K, 60 Hz
18 Gbps for all channels in total
DTS-HD Master Audio
178 x 67 x 22 mm (No. 2255588)
259 g (No. 2255588)
*2251516_2255588_v1_0620_02_jh_m_en