Assembly Or Installation Instructions - Style selections FHTS80021 Mode D'emploi

ASSEMBLY INSTRUCTIONS
1. Carefully place the chair side on a soft surface. Then attach
the chair right leg (2) to the right seat tube of the chair.
Attach the front leg connector (4) to the right leg (2), attach the
back connector (5) to the right leg (2). Use bolts (AA) and (GG).
Hardware Used
2.
Carefully place the chair side on a soft surface. Then attach
the chair left leg (3) to the left seat tube of the chair.
Attach the front leg connector (4) to the left leg (3), attach the
back connector (5) to the left leg (3). Use bolts (AA) and (GG).
Hardware Used
3 Tighten the bolts (HH) to the two sides of back leg connectors.
.
Use bolts (HH).
Hardware Used
1
x 2
x 2
2
x 2
x 2
3
x 2
19