Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Problems

If the charger displays a malfunction while a battery
is connected, it is best to connect another battery for
a short period to determine whether the fault is in the
battery or in the charger. If the problem cannot be
rectified, please contact the service workshop.
Please also check:
Is the cable making a firm contact?
Replace the cable if necessary.
Has the vehicle's electrical system sufficient energy
(voltage, fuse in vehicle cable, battery charge)
Is voltage supplied to the mains socket?
Leica Geosystems GKL24 User Manual-1.0.0en

Tips

Let batteries in the instrument run down as far as
possible.
Batteries should always be charged in a vehicle while
the motor is running.
In order to utilise the battery's capacity to the full, new
batteries should be fully charged and discharged three
to five times.
During the charging process avoid fast increasing of
ambient temperature, eg. by exposure to sunlight of
chargers and batteries.
Fast increasing of ambient temperature could result
in an early end of charging with reduced battery
capacity.
11
Operation

Publicité

Table des Matières
loading

Table des Matières