Technical Data - Anslut 018346 Mode D'emploi

EN

TECHNICAL DATA

Battery
Luminous flux
DESCRIPTION
1. Solar panel
2. Chimney
3. Lamp stand
4. Ground spike
FIG. 1
USE
NOTE:
Before the solar cell lamp can shine at full capacity the solar
panel must have charged the battery in direct sunlight for 48
hours.
1. Twist the solar panel to release it from the chimney.
2. Pull off the plastic tab (5) between the battery and the
18
Recycle discarded product as electrical waste.
500 mAh Ni-MH AA
5 lm