Tommee Tippee Closer to Nature Mode D'emploi page 3

Closer to Nature® electric steam sterilizer
Before using your closer to nature steam sterilizer, please ensure that you read all instructions thoroughly.
Please save this instruction sheet for future reference as it includes important information.
This sterilizer is designed for use with tommee tippee® closer to nature and ultra bottles. The sterilizer will hold up to
5 closer to nature® bottles and 4 ultra bottles.
PARTS GUIDE
(see diagram)
A. Removable lower tray
B. Removable upper tray
C. Central Stem
D. Locator for Closer to Nature® bottle neck
E. Locator for Closer to Nature® anti-colic plus valve (if sterilising closer to nature® anti-colic plus bottles)
F. Locator for bottle hood
G. Lid
H. Sterliser base
I.
Lead with plug
J. Power button
K. Cancel button
L. LED (sterilising light)
M. Steam vents
IMPORTANT INSTRUCTIONS FOR SETTING UP YOUR STERILIZER BEFORE FIRST USE:
1. Do not connect to power at this stage.
2. Remove all items from inside the sterilizer base.
3. Pour exactly 2.7 fl.oz / 80ml of water into the sterilizer base. Your closer to nature® bottles have a handy measure.
4. Assemble the white lower tray (A), central stem (C) and upper tray (B) and place in the sterilizer base.
5. Add the lid.
6. Plug the electric cord into your electric outlet. The start switch and sterilizing light should come on automatically. If it does not
then press the switch and it will light up amber to show that sterilizing has begun.
7. The light will switch off when sterilizing has finished.
8. Allow to cool for 3 minutes before unplugging.
9. Remove lower tray, central stem and upper tray, pour away any remaining water and wipe dry. Your sterilizer is now ready for use.
FOR INSTRUCTIONS ON HOW TO CLEAN AND STERILIZE THE TOMMEE TIPPEE® BOTTLES, PLEASE SEE SEPARATE LEAFLETS.
USING THE ELECTRIC STEAM STERILIZER
Preheating of the appliance is not necessary.
1. Before sterilization, wash all bottles and feeding accessories in warm soapy water or in a dishwasher (top rack only) to remove any
milk residues. Separate all components for washing and reassemble nipple and screw ring for sterilizing.
WARNING: DO NOT ALLOW PRODUCT TO COME INTO CONTACT WITH OIL BASED FOODS (e.g. OIL/TOMATO BASED SAUCES)
AS STAINING WILL OCCUR.
2 2
Pour exactly 2.7 fl.oz/ 80ml of water into the
sterilizer base. Your closer to nature® bottles
have a handy 80ml measure.
WARNING: MORE THAN 80ML OF WATER IN
16 16
THE STERILIZER BASE WILL PROLONG THE
CYCLE TIME. LESS THAN 80ML MAY NOT
STERILIZE ITEMS PROPERLY.
4 4
Place the bottles neck downwards into the
locators of the removable lower tray. If using
closer to nature® anti-colic bottles, place
bottle parts in the locators as shown.
3 3
Assemble central stem and lower tray
into the sterilizer base.
5 5
Fit the removable upper tray into place.
6 6
Place the assembled teat and screw ring in
the locators of the removable upper tray. It is
important not to have the hoods fitted onto
the teat and screw ring.
8. Place the lid onto the sterilizer base.
9. Plug in and switch on.
10. Press the start switch and it will light up amber. This shows that sterilizing has begun.
11. The light will switch off when sterilizing has finished.
12. Allow to cool for 3 minutes before opening the sterilizer.
13. The contents will remain sterile for 24 hours if the sterilizer is unopened.
14. Wash your hands thoroughly before handling sterilized items. Take care as the items will be hot.
Remove the sterilised items. The teat tongs can be used to remove the small items. The trays when removed
15
and placed flat become another hygienic work surface for assembling your bottles.
16. Drain and rinse unit to prevent a build up of limescale.
CLEANING YOUR ELECTRIC STERILIZER
After each use, unplug and allow to cool before cleaning. Pour away any excess water and wipe with a damp cloth only. Do not clean
with abrasive cleaners or allow to come into contact with solvents or harsh chemicals, damage could result.
DE-SCALING
De-scale your electric sterilizer every 4 weeks to ensure it continues to work efficiently.
To descale your electric sterilizer:
1. Empty the electric sterilizer and wipe down the inside with a sponge or damp cloth.
2. Pour in 1 cup of white vinegar.
3. Turn sterilizer on and run for 5 minutes.
4. Unplug the unit and let cool, then pour any remaining liquid down the sink. Rinse the interior of the sterilizer well with cool water
and use a clean sponge or damp cloth to remove any buildup that came loose as a result of the descaling / cleaning process.
5. Plug unit back in and add regular amounts of water you use for normal warming. Turn on and run for 5 minutes to remove any
additional build up. Upon completion, rinse sterilizer again and use as directed.
PROBLEM CHECK
Sterilizer will not work Check the electrical cord is plugged into the unit and the electrical outlet is switched on.
Check the electrical outlet by plugging in another appliance.
Excessive steam Items incorrectly loaded in sterilizer. Refer to Instructions for Use.
Bottles come out with mark Sterilizer needs descaling. Refer to Cleaning Instructions.
Cycle takes too long to complete Too much water in sterilizer. Use exactly 2.7 fl.oz / 80ml
7 7
6 6
Slot the hoods into the hood locators of the
removable upper tray so that they hang over the
nipple and screw ring but are not fully
assembled.