Conceptronic C54APM Guide De Démarrage Rapide page 39

ENGLISH
3.2.2.4. Wireless Setting – AP Bridge Point to Point Mod
Parameter
Channe l Number
MAC Address 1
Set Security
Click the Apply button at the bottom of the screen to save the above configurations.
Description
Select the appropriate channel from the provided list to corresp
with your network settings.
If you want to bridge more than one wired Ethernet networks
together with wireless LAN, you have to enter the MAC addresses of
other access points that join the bridging work.
You can click "Set Security" to add encryption for the commu
between the bridged access points. This can protect your wi
network. (For more information about the security settings, see
section 3.2.2.8)
39
e
nication
reless
ond