Water Pump Components - BE WILDLAND Serie Mode D'emploi

WATER PUMP COMPONENTS

8.
1.
14.
6.
9.
7.
4.
1. Fuel Tank Fill tank with regular unleaded fuel. Always leave room for fuel
expansion.
2. Priming Plug Fill pump with water here to prime pump before starting.
3. Discharge Outlet Connect discharge hose here.
4. Choke Lever Prepares a cold engine for starting.
5. Air Cleaner Protects engine by filtering dust and debris out of intake air.
6. Recoil Starter Used for starting the engine manually.
7. Engine Speed Lever Used to adjust engine speed to control pump output.
8. On/Off Switch Set this switch to "On" before using recoil starter. Set switch to
"Off" to stop a running engine.
9. Oil Drain Drain engine oil here.
10. Oil Fill Check and add engine oil here.
11. Suction Inlet Connect reinforced suction hose here.
12. Water Drain Plug Remove to drain water from pump and flush internal
components with clean water.
13. Pump Chamber Be sure to fill with water before starting.
14. Fuel Shutoff Valve Used to turn fuel supply on and off to engine.
Item Not Shown:
Strainer Basket Used to limit passage of abrasive materials into the pump.
Read this operator's manual and safety
rules before operating your water pump.
10.
11.
2.
13.
3.
11.
12.
11