Program Menu Parameters - Anderson The Guardian III Manuel De L'opérateur

Program Menu Parameters

•
Guardian Menu Definitions
Pen 1 (Configuration values for pen 1)
Pen 2 (Configuration values for pen 2)
StUH (Tank wash alarm parameters)
PLUH (Pipeline wash alarm parameters)
Chrt (Chart programming parameters)
rtC (Real time clock programming values)
Fid
Boot
Anderson Guardian
• InPS Selection for Deg F or Deg C
• Icor Input correction factor used to adjust recorder display and pen to
match another reference device.
• dPOS Decimal position for recorder display
• InPS Selection for Deg F or Deg C
• Icor Input correction factor used to adjust recorder display and pen to
match another reference device.
• dPOS Decimal position for recorder display
• thot Necessary time duration at target temperature
• tPo2 Temperature that a tank wash must achieve
• Phot Necessary time duration at target temperature
• tPO1 Temperature that a line wash must achieve
• ChSP Chart speed (24hr, 48hr, 72hr, and 7 day)
• YEAr Value representing year "200X"
• IIon Value representing month
• dAY Value representing day
• Hr Value representing hour
• IIIN Value representing minutes
• Fid1 First four digits of Farm Identification Number
• Fid2 Second four digits of Farm Identification Number
• Caution - this menu option for Factory Setup only
15