Denver Electronics DBO-6501 MK2 Serie Instructions D'origine page 111

Chapter 1 General information
1.1. The risk of driving
WARNING!
- Learn how to drive safely before you drive fast on the scooter.
- Failing, losing control, crashing, including violating the rules in the user's manual can lead to injury.
- Speed and range may differ based on rider weight, terrain, temperature, and driving style.
- Make sure to wear helmet and protective clothing before using the scooter.
- Make sure to read the manual carefully before using the scooter.
- Only for use in dry weather.
- We do not recommend the use of any balance scooters on public roads
- Please make sure to check with your national laws in your country for usage this product.
1.2. The preparation before operation
Before using, the battery should be fully charged. Please check Chapter 6.
1.3. The weight limitation of the operator
The reason of the weight limitation: 1. guarantee the safety of the operator; 2. decrease the damage of
overloading.
Maximum load: 120kg.
Chapter 2 Operating the Balance scooter
2.1. Description and identification
2.2. Calibration
If your scooter seems to pull to the left or right, you may need to recalibrate its sensors. Step as below:
Step 1: Shut down/level the scooter
Step 2: Press the Power button for more than 10 seconds until you see the light flashing 5 times.
Step 3: Shutdown scooter again.
Step 4: Power on, finished calibration.
Built in Self-Balance function, it is easy for driving.
Bumper Strip
Pedal
Decorative Light
Tire
Power On/Off
DC Port
ENG 1
Indicator
Protective cap for chassis
Fender