Lance Lab AR 8 Manuel D'utilisation page 7

Assembly Instructions: AR 8
Adjustable Telescopic Lance
7. Insert the scoop into powder chamber to
load the powder. Repeat this until the fill line
is reached in the powder chamber.
(Keep powder chamber at a 45° angle
during filling).
9. Remove the yellow end cap from
lance.
11. Bend the flexible nozzle to the
required shape and then remove the
yellow tip cap.
8. Screw the flexible nozzle back
onto the powder chamber.
(Keep powder chamber upright).
10. Unscrew the bottom cap from the
powder chamber and then screw onto the
top of the lance. (Do not over tighten).
To avoid damage do not bend
the flexible nozzle sharply!
EN
-7-