WAGNER FURNO 500 Mode D'emploi page 7

FURNO 500
Touch Pad Control Panel
The heat gun gives you a wide temperature range to choose from, depending upon the type of project. Temperature can be adjusted via the
Control Panel.
Temperature Guide LED display
Description Fig. 3
1) Power button: Turns the heat
gun ON and OFF or switches
to cool down mode
3) Mode indicator: Low air flow
/ low temperature range (See
Fig. 4, a)
5) Mode indicator: Cool down
7) Temperature selector:
Decreases temperature (-)
Fig. 3
1
3
5
7
2) Mode selector: Sets the
temperature range and air
flow speed you are using
4) Mode indicator: High air flow
/ high temperature range
(See Fig. 4, b)
6) Temperature indicator:
Shows the current heat
output setting (see Fig. 4)
8) Temperature selector:
Increases temperature (+)
2
4
6
8
Description Fig. 4a & 4b
Air flow mode:
LOW
Temperature range:
60 o C - 550 o C
Cycle temperatures:
See Fig. 3, (7 & 8)
= Illuminated
= not illuminated
Fig. 4a
Cool Down Mode
During rest periods or when you are finished with your project, press
the power button to enter cool down mode (Fig. 5). The blue cool down
indicator light will turn on and the gun will continue to run with the
element disabled, for cooling.
EN
Air flow mode:
HIGH
Temperature range:
100 o C - 600 o C
Cycle temperatures:
See Fig. 3, (7 & 8)
= Illuminated
= not illuminated
Fig. 4b
7