iOttie Aivo CONNECT Manuel De L'utilisateur page 7

Pairing & Connecting a Device
1. After Aivo Connect powers on, hold the Invoke Alexa
Button for 5 seconds to initiate Setup Mode. The
LED Ring will pulse orange as Alexa directs you to
the Alexa App to add a new device.
2. In the Alexa App, navigate
to Add Device > Auto
Accessory, then select from
available devices: iOttie Aivo
Connect (####) and pair
device. Allow location access
and make sure Bluetooth is
discoverable and turned on.
! WARNING: For your safety, please do not
pair/connect device while driving.
3. Once device is paired and connected, the LED Ring
will flash blue three times before turning off.
Alexa is now ready to use.
* Device will now connect automatically when it is powered on and your
smartphone is in close range.
* To unpair device, hold the Invoke Alexa button for 5 seconds until it
flashes orange and select "Forget Device" from phone's Bluetooth
settings.
Updating Device Firmware via iOttie Connect App
For an optimal user experience, make sure you
have the most up-to-date device firmware installed
from the iOttie Connect app. Follow instructions
for updating device firmware in the app.