ASROCK 775Twins-HDTV Mode D'emploi page 16

Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
VGA_2x8 Cable
AV/S_2x3 Cable
VGA Header
(VGA1: see p.2 No. 32)
TV-OUT Header
(TV-OUT1: see p.2 No. 31)
USB 2.0 Header
(9-pin USB67)
(see p.2 No. 21)
1 6 1 6 1 6
1 6 1 6
ASRock 775Twins-HDTV Motherboard
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
connect to the
power cable to the power
power supply
connector of the power supply.
Please connect either end of
VGA_2X8 cable to J1 jumper of
VGA_HDTV panel and the other
end to VGA1 header of this
motherboard.
Please connect either end of
AV/S_2x3 cable to J2 jumper of
VGA_HDTV panel and the other
end to TV-OUT header of this
motherboard.
Please connect either end of
VGA_2X8 cable to VGA header.
Please connect either end of
AV/S_2X3 cable to TV-OUT
header.
HD 8CH I/O accommo-
dates 4 default USB 2.0 ports. If
those USB 2.0 ports on the I/O
panel are not sufficient, this
USB 2.0 header is available to
support 2 additional USB 2.0
ports.