Télécharger Imprimer la page

Empire DVCX Serie Instructions D'installation page 2

Publicité

Les langues disponibles

Les langues disponibles

INSTALLATION OF LINERS
1.
Prebend the brackets included with the kit as shown in Figure 3.
For Ceramic Fiber Liners Only: Place left and right rear
2.
legs as shown in Figure 4.
3.
Place rear panel on the back of the firebox and hold with one
hand. See Figure 5. Ensure rear panel is resting on fiber legs.
Note for Reflective Liners Only: Place insulation behind
rear liner before installing.
Page 2
Figure 3
Figure 4
Figure 5
Empire Comfort Systems Inc. • Belleville, IL
4.
Remove the screw plugging the bracket hole in the top of
the firebox.
5. Place left panel against left firebox and rear panel and hold
side in place. Secure panel in place with one of the brackets
and one #10 X 1/2 screw. See Figure 6.
NOTE: The side liners each have a small dimple to indicate the
bottom rear of the liner. When properly installed, the dimples will
be at the bottom rear of the fireplace.
6.
Repeat steps 4 and 5 for the right side.
Figure 6
34363-3-0220

Publicité

loading

Ce manuel est également adapté pour:

Dvp36xkr-1Dvp42xkr-1Dvf36xkr-1Dvf42xkr-1Dvp36xcb-1Dvp42xcb-1 ... Afficher tout