Functions - YORKVILLE LP-C12 Manuel D'utilisateur

S t a g e L i g h t i n g
There is a yellow LED indicator on each channel that illuminates with a brightness correspond-
ing to the brightness of the light on that channel.
S
Cene
This bank of thirteen scenes allows you to store your favourite or most frequently used lighting
scenes in the LP-C12's internal memory for instant recall at any time. To recall a scene, simply
push the corresponding button, and the lights will change to your stored setting. Changes to
scenes are stored in real time; to save a scene all you need to do is select the scene you wish to
change and make your changes.
The LP-C12 has a scene auto-advance feature. This feature moves through the scenes from
Scene 6 to Scene 13, and then back to 6 again. If you look at the controller, you will notice that
Scenes 1-5 are grouped together, and Scenes 6-13 are together. This arrangement is to help you
remember which scenes the auto-advance feature uses.
F
unCtiOnS
2
Color – This rotary encoder is used to select the color of the corresponding light. (The LP302
or LP304 lights will ignore the color control)
Intensity – This control is used to set the brightness of the corresponding light head. When
this knob is pushed down, it will momentarily flash the corresponding light to full intensity.
Scene 1
Scene 6 Scene 7
S
eLeCtiOn
ALL CHANNELS
Channels 1-4
Hint: Use scenes 1 to 5 for special scenes like when the leader of the performance is talking to the audi-
Channels 5-8
ence or to highlight solo portions of the performance. Set scenes 6 to 13 to vary generic lighting of all the
Channels 9-12
performers. This way when using the Auto Scene Advance the solo lighting scenes will not be used.
Ch. 1-4, 5-8
EFFECTS
Flash: All White
Flash: All Red
All On
Effects – Press this button to engage effects (see next section for description of effects).
If this button is pressed when the effects are on it will turn off the effects and return to the
active scene. The channels that receive effects are selected by the effects Patch control. The
type of effect is selected by the effects Select control. The effects operation is described in
detail later.
Flash: All White – This function momentarily turns on ALL connected lights to white.
NOTE: For LP302/LP304 the flash function will not change the color of the lights. Whatever gels are
in use will be the colors that are flashed by this function.
Flash: All Red – This function momentarily turns on ALL connected lights to red.
NOTE: For LP302/LP304 the flash function will not change the color of the lights. Whatever gels are
in use will be the colors that are flashed by this function.
All On – This function turns on all lights to a pre-determined color (different colors on each
channel). If this button is pressed while already in the ALL ON mode the All On mode will be
cancelled and the unit will return to the active scene.
NOTE: For LP302/LP304 the colors will be determined by the gels in use rather than by the pro-
gram.
BLACKOUT – As its name implies, this function will turn off ALL connected lights. Pressing
this button again will return to the active scene, exiting the blackout mode.
Scene 2 Scene 3 Scene 4
Scene 8 Scene 9 Scene 10 Scene 11 Scene 12 Scene 13
P a tc h S e l e c t
Chase
Ch. 1, 2, 7, 8 Audio Chase
Bar 1, 2, 3 TMB Red
Bar 1, 2, 3 TBb Blue
Bar 1, 2, Ch. 9-12 Colors
Ch. 3, 4, 5, 6, 9-12 White
Ch. 5- 8, 9-12 Color Fade
Ch. 1-4, 9-12
Fade Rate Effects Speed
BLACKOUT
LP -C12
Scene 5
Audio
4 Bands Slow
3 Bands Fast
Flash Colors
Flash All Colors
Flash All RED
Strobe
Auto-Scene
Advance
(Scenes 6 - 13)